Typical applications:

• Primarily used for vacuum heating degassing of the coupler housing and suppression of air oxidation
• Suitable for vacuum drying products with a vacuum degree not less than 10Pa and a long-term working temperature range from RT to 200℃
• Suitable for use in nitrogen atmosphere, vacuum, and low-temperature heating environments

Performance parameters

• Product Model: Custom Non-standard
• Operating Temperature: RT～200℃
• Maximum Temperature: 200℃
• Chamber Dimensions: 900×1000×1600mm (W×H×D)
• Heating Element: Ceramic Fiber Heating Plate
• Controlled Atmosphere: 1 Nitrogen Gas Line
• Temperature Control Accuracy: ±1℃
• Control Method: Imported Temperature Controller, PID Auto-tuning
• Temperature Control Points: Front, Middle, Rear (3 points)
• Temperature Measurement Points: 8 Patch Thermocouples
• Vacuum Detection: Vacuum Gauge Tube and Vacuum Meter for Detection
• Alarm Protection: Over-temperature, Thermocouple Break, Vacuum Pump Overload, Low Pressure, Reverse Phase Loss with Sound and Light Alarm
• Design Power: ~12kW
• Power Supply: Three-phase Five-wire, 380/220VAC, 50Hz
• Equipment Weight: ~1200Kg
• Overall Dimensions: 1690mm×1550mm×2290mm (W×H×D)

1. This equipment must be installed indoors, with an ambient temperature range of 0°C to 45°C. The indoor environment should be free of flammable gases, corrosive gases, and steam.
2. The equipment requires a minimum floor space of 9 square meters. The workspace should be at least 3 meters long, 3 meters wide, and the height should not be less than 2 meters. The foundation must be solid and level, with the total weight of the furnace being approximately 1200 kg.
3. The power supply for this equipment must be a three-phase five-wire AC line, with voltages of 380/220 ± 10% V and a frequency of 50 ± 2% Hz. This power line should be dedicated, and large power conversion devices such as welding machines, electric furnaces, and metal cutting machines should not be connected to this distribution.
4. The equipment must be reliably grounded.
5. The gas inlet pressure for the equipment should be between 0.2 and 0.4 Mpa.

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.