Air Atmosphere 860*1750*1220mm Chitherm MBF60-10 Sintering Box Furnace for Industrial Applications

Primarily used for electronic components and ceramic filters in high temperature binder burn-off and sintering processes.

• Rated Temperature: 900ºC
• Maximum Temperature: 1000ºC
• Effective Dimensions: 350 × 300 × 550mm (W×H×D)
• Heating Method: Heating Plate with resistance alloy wires
• Process Atmosphere: Air
• Temperature Control Stability: ±1ºC with PID parameter self-tuning
• Temperature Uniformity: Better than ±5ºC (after 2 hours insulation at 900ºC)
• Thermocouple: Type K
• Temperature Control Points: 1
• Temperature Measurement Points: 1
• Process Steps: 9 steps
• Exhaust System: One exhaust port with auto cover
• Alarm System: Sound and light alarms for over-temperature, thermocouple failure, with automatic power cutoff
• Maximum Heating Power: 16kW
• Insulation Power: ≤ 8kW
• Surface Temperature Rise: ≤ 35ºC
• Weight: Approximately 400kg
• Furnace Dimensions: Approximately 860×1750×1220mm (W×H×D)
• Appearance Color: Light gray

Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance.

Clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 3 - 6m³/h.

Non-contact access to user pumping system with capacity greater than 10m³/h.

Level surface, no significant vibration, bearing capacity > 250Kg/m².

Capacity greater than 22kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz (according to local standards).

Minimum space requirements: 1800mm×1850mm×3000mm (W×H×D), installation area greater than 3.5m².