Electric Chitherm BF260-16 High Temperature Bell Furnace for Air Atmosphere and Electric Fuel at High Temperature

Widely used in the adhesive sintering process of zirconia ceramics, magnetic materials, electronic ceramic components and other products.

• Rated Temperature: 1500°C
• Maximum Temperature: 1600°C
• Effective Dimensions: 720mm × 500mm × 720mm (D×W×H)
• Heating Method: MoSi2 heating element
• Thermocouple: B-Type
• Temperature Control: 1 Point
• Temperature Set Accuracy: ±1°C (flat temperature insulation)
• Temperature Control Mode: Japanese Daiwa Chino Programmable Temperature Controller with PID auto-tuning functionality
• Temperature Uniformity: ±5°C (empty furnace insulation test 2 hours under 1500°C)
• Maximum Heating Power: 85kW
• Insulation Power: ≤40kW
• Program Control: SCR Control Module
• Lifting Mechanism: Lead Screw Drive Elevation System
• Control Method: Phase Angle Control
• Operating Atmosphere: Air
• Exhaust System: Top-mounted exhaust stack for effluent discharge
• Protection Functions: Audible & visual alarm system for over-temperature, motor overload, and over-travel conditions
• External Dimensions: 1950 × 3600 × 3100mm (D×W×H) (without control cabinet)
• Appearance Color: Light gray

• Environmental Conditions: temperature: 0~40°C, humidity ≤80%RH, no corrosive gas, no strong airflow disturbance
• Atmosphere Conditions: dry, clean, oil-free compressed air, working pressure of 0.2-0.4MPa, gas consumption of 10-30 m³/h
• Ventilation System: non-contact access to the user pumping system, pumping capacity greater than 30 m³/h
• Ground Requirements: horizontal, no obvious vibration, load-bearing >500 Kg/m²
• Power Condition: capacity >120kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz
• Installation Site: 4000mm×3500mm×4000mm(D×W×H), with an installation area greater than 14m²

Company Profile

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces.

Our product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics.

These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.