The HBF52-17O type high-temperature box furnace utilizes silicon-molybdenum rods as the heating element and features a vertical installation method. It is arranged on either side of the furnace chamber, ensuring uniform temperature distribution within the chamber. The device is easy to operate and suitable for various laboratory processes.

Widely used in high-temperature, high-cleanliness epoxy curing and sintering processes for products such as:

• Electronic ceramics
• Ceramic filters
• Magnetic materials
• Electronic devices

• Product model: HBF52-17 high-temperature box furnace
• Rated temperature: 1650°C
• Maximum temperature: 1,700°C
• Effective dimensions: 350 × 300 × 500mm (W × H × D)
• Furnace lining material: inner layer of alumina product
• Heating element: silicon-molybdenum rod
• Temperature uniformity: ±2.5°C (holding at 1650°C for two hours)
• Number of program steps: 4 × 16 segments
• Temperature control points: 1 point
• Alarm protection: Interlocked heating process and furnace door operation with audible/visual alarms for overheating, broken thermocouple, or low pressure
• Maximum heating power: ≤25kW
• Power requirements: three-phase five-wire, 220/380VAC, 50Hz, >34kVA

1. The device must be installed indoors, in an environment with a temperature range of 0°C to 40°C. The area must be free from flammable gases, corrosive gases, and steam.
2. The equipment must occupy a minimum area of 5 square meters, with a working space that is at least 2.5 meters long and 2 meters wide, and the height should not be lower than 3 meters. The foundation should be solid and flat, and the total weight of the furnace is approximately 850 kg.