Mainly used for zirconia ceramics, alumina ceramics, ferrites, magnetic materials, electronic components, ceramic filters in high temperature binder burn off and sintering process.

• Rated Temp: 1600ºC
• Max Temp: 1700ºC
• Effective Dimensions: 500 × 500 × 500mm (W×H×D)
• Heating Method: U-shaped MoSi2 Heating Elements
• Process Atmosphere: Air
• Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
• Temperature Uniformity: better than ±5ºC (insulation 2 hours at 1600ºC test)
• Thermocouple: B Type
• Temperature control points: 1
• Temperature measurement points: 1 point
• Number of Temp. Profiles: 19×19 (the temperature controller can save 19 profiles, each profile can be set 19 steps)
• Exhaust: One exhaust port with auto cover
• Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection, over temperature heating power will turn off automatically
• Max Heating Power: 45kW
• Insulation Power: ≤25kW
• Heating Rate: RT - 1200ºC ≤ 5ºC/min, 1200 - 1700ºC ≤ 2ºC/min
• Surface Temperature Rise: ≤ 35ºC
• Weight: about 1100kg
• Furnace Dimensions: about 1770×2150×1250mm (W×H×D)
• Appearance Color: light gray

• Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance.
• Process air conditions: clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 4 - 12m3/h.
• Ventilation system: non-contact access to the user pumping system, pumping capacity is greater than 15m3/h
• Ground requirements: level, no obvious vibration, bearing capacity > 500Kg/m2
• Power conditions: capacity greater than 60kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green
• Installation site: 2500mm×3500mm×2500mm (W×H×D), installation area greater than 7m2

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces.

Our product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics.